Slacken and remove the upper securing screw and move the runner away from the glass.Mark the position of the glass rear runner upper securing screw. Slacken and remove the door glass rear runner lower securing screws. Position PVC secondary water shedder for access.Motor door glass to fully raised position.If an obvious cause for an observed or reported concern is found,Ĭorrect the cause (if possible) before proceeding to the next step.Luggage compartment lid exterior release switch Misaligned door(s), hood or luggage compartment lid Jaguar 2000-06 - Locks & Lock Systems Power Door Locks - Removal & Installation Door Lock Switch Door Lock Diagnosis & Testing And reverse/refit all the parts which you removed while replacing the old door lock. 9) Insert the new lock carefully to the proper position. So while inserting new lock there is no problem about placing the new lock. 8) Now before removing the old door lock, please take note of the position in which it is placed. 6) Take the door handle out 7) Now in the door remove the rod from lock core.Then remove the two bolts holding the door handle assembly. the interior door handle is fitted by plastic clips you can use a pliers to pop out the plastic clip, then twist the clip to allow the interior door handle to swing free and easily come out. 4) After the screws are removed the door handle will come out 5) Now the interior doors handle needs to be removed. 3) Then remove the door handle screws with the help of screwdriver. The door panel is connected by plastic clips. The procedure to replace the door locks in car is as follows:- 1) First of all carefully r emove the arm rest and any speaker covers if speakers are connected.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |